IPv6 static routing: default, network, host, and floating static routes

3 quick checks≈4% of the testCore

Reading is free. Sign in to tick off lessons, keep your place and track your mastery.

By the end you’ll be able to

Configure and verify an IPv6 default static route.
Configure and verify an IPv6 network static route to a remote destination prefix.
Configure and verify an IPv6 host static route by using a /128 prefix.
Configure and verify an IPv6 floating static route by setting an administrative distance higher than the preferred primary route.

0% read

Troubleshoot basic IPv6 static routing issues by using route and interface verification output.

This lesson hasn’t been written yet

CCNA lessons are written from the official syllabus the first time a learner opens them, then saved for everyone. Sign in and this one is written for you in a minute or two. It’s free.

Sign in Create a free account